Vibration Exposure Risk Assessment at Work
Many customers are required to make Vibration Exposure Risk Assessments in their factory or place of work.
Our
Health and Safety at Work section details the wide range of instruments we hire and the HSE web-site describes the Noise at Work Regulations. This page is for the customer who wants to hire equipment that others are using to meet these requirements and make the following measurements
Hand Arm Vibration - HAVS
Vibration White Finger - VWF
Whole Body Vibration - WBV and VDV.
All our meters, and calibrators are delivered with traceable certificates.
It is good practice to use a calibrator on-site before and after each measurement and log the fact with all serial numbers in the report.
Hand Arm Vibration White Finger Kits - VWF.
| B&K 4447 |
Bruel & Kjaer Hand Arm, White Finger Kit |
£ 29 a day * |
| B&K 4447 | Vibration White Finger Exposure - simultaneous triaxial measurements. |
| B&K 4294 | Vibration Calibrator |
| HVM100 |
Larson Davis Hand Arm, White Finger Kit |
£ 29 a day * |
| HVM100 | Vibration White Finger Meter - simultaneous measurements in all three axis. |
| B&K 4294 | Vibration Calibrator |
Whole Body Vibration Kits - WBV.
| B&K 4447 |
Bruel & Kjaer Whole Body Vibration Kit |
£ 39 a day * |
| B&K 4447 | Whole Body Vibration Meter - simultaneous triaxial measurements. |
| B&K 4294 | Vibration Calibrator |
| B&K 4515-B-002 | Triaxial Seat Pad Accelerometer |
| HVM100 |
Larson Davis Whole Body Vibration Kit |
£ 39 a day * |
| HVM100 | Whole Body Vibration Meter - triaxial monitoring. |
| SEN027 | Triaxial seat pad sensor = 100 mV/g = 10 mV/ms-2 |
| B&K 4294 | Vibration Calibrator |
| Vibrock V901-2 | Triaxial Vibration Recorder with Human Vibration Dose Measurement - dual channel |
£ 33 a day * |
Vibrock - dual channel vibration analyser for continuous level recording or event monitoring and/or recording VDV vibration dose levels.

Delivered with one triaxial PPV -
peak particle velocity transducer and a triaxial VDV vibration dose transducer **.
The PPV vibration transducer details are detailed here
VDV - Vibration Dose Value
When using the VDV vibration dose transducer, the instrument complies with BS 6472 and BS 7482 part 3 with automatic day/night change over. Both 30 second and 1 hour dose levels are recorded and the resultant 16 or 8 hour values calculated in the range 0.025 to 10 m/s
- 1.75.
Ideal for whole body vibration measurements when the operator is standing on the vibrating surface. You can still record the PPV levels etc., on the other channel.
Vibrock V901 Specifications
Robust, weatherproof and lightweight - kit also includes PC download software with a cable.
The transducer leads are 1.2 m long, order
extension cables if required.
** If you want to use the second channel for additional
PPV type measurements, then add an extra
PPV transducer and suitable extension cables
See our full range of health and safety meters and systems.
* Our standard hire charges are based on a 4-day minimum period,
details other options.
Gracey & Associates 01933 624212 hire@gracey.com
British Standards accreditation for noise and vibration instrument hire and calibration
Home l
Manufacturers l
Applications l
Hire Notes + FAQ l
Site Search l
Standards l
Glossary