Manufacturers' Specifications
TEAC RD 200
|
Main Specifications : Recording and Reproduction Method : Multiplex PCM providing analogue input and output Recording Format :Helical scan R-DAT Quantization :16 bits Data Recording Length : Bit quantization of 14 most significant bits Heads : 4 off 2-heads for record / reproduction 2-heads for error checking during record and replay Head Rotation : 2000 rpm recording and replay Erasure : by overwriting Error Correction Method : Double Reed-Solomon Tape : DAT standard, Hitachi Maxwell tapes are recommended DM120 : tape length 60 m, tape width 3.81 mm Tape Speed : 8.15 mm/s recording and reproduction Recording Time : 2 hours with DM120 tape, 60 m long Start/Stop Time : 2 seconds approximately Fast-Forward or Rewind : 60 seconds approximately I/O Specifications : Analogue Channel : Input Voltage : ± 0.5 : ± 1 : ± 2 : ± 5 : ± 10 : ± 20 Vp max Input Zero Shift : ± 100% set to On / Off by trimmer Input Impedance : Nominal 100 kΩ unbalanced Input Filters : Analogue filter and 1/2 decimation digital filter are used Output Voltage : ± 1 : ± 2 : ± 5 V Peak, trimmer variable Output Impedance : 75 Ω unbalance Output Current : ± 10 mA, 20 Ω load Output Filter : Analogue filter and four-times over sampling digital filter are used Multi-Band Channel and Frequency Combination : |
| DC-20 kHz | DC-10 kHz | DC-5 kHz | DC-2.5 kHz | |
| 2-channels | 2 | - | - | - |
| 3-channels | 1 | 2 | - | - |
| 4-channels | - | 4 | - | - |
| 5-channels | 1 | - | 4 | - |
| 6-channels | - | 2 | 4 | - |
| 8-channels | - | - | 8 | - |
| 9-channels | 1 | - | - | 8 |
| 10-channels | - | 2 | - | 8 |
| 12-channels | - | - | 4 | 8 |
| 16-channels | - | - | - | 16 |
|
Frequency Characteristic : Flat +0.5 dB, -1 dB SN Ratio : 70 dB Phase : 5 ° or less between channels Skew : 0.69 µs for 20 kHz : 1.39 µs for 10 kHz : 2.78 µs for 5 kHz : 5.56 µs for 2.5 kHz Crosstalk : Less than noise level Linearity : ± 0.2 % Distortion : 0.05 % at half maximum band frequency Drift : ± 0.2 5% or less after 10 minutes warm up Operating Conditions : Temperature : 0 °C to 40 °C : 32 °F to 104 °F Humidity : 20 % to 80 %RH, non condensing Vibration : conforms to MIL-STD-810C Table 514.2-V1 curve Shock : conforms to MIL-STD-810C 30G-11ms Functions : ID Data : The following recording/reproduction displays ID number : 01 to 99 Incremented at start of recording, or each time Event key is press during recording Clock : Year : month : day : hour : minute and seconds Input Range : All channels Title : 10 alphanumeric characters, keyed input Memo : 50 alphanumeric characters Search : High speed search using ID number or counter Control : F-FWD : REW : FWD : STOP : REC : PAUSE and EJECT buttons Monitor : • Bar meter, EL display of all channels • Waveform EL display of any two channels • Speaker / earphone, monitor selected channel • BNC connector, monitor selected channel Test Signal : AC 50 %, 1 kHz : DC + 50 % : DC - 50 % and 0 V, or output all 4 continuously by selecting AUTO Panel Lock : locks all keys End Search : searches the end of recording or END ID END ID : Records END ID Self Test : Tests A / D conversion system and tape drive. checks the ROM and RAM Controls : FFWD : REW : FWD : STOP : REC : PAUSE : EJECT Power : Power System : Switching regulator system Supply Voltage : 90 to 250 VAC, 50 to 60 Hz or 11 to 30 VDC Current : 0.4 A with 220 VAC or 5 A with 12V DC Size and Weight : Width : 440 mm Height : 150 mm Depth : 270 mm Weight : 13 kg : 29 lb |
| E&OE - specifications subject to change without notice. |
- Gracey and Associates 01933 624212
- BSI approved for the hire of noise and vibration instruments
- Home
- Search